Pa Soft 1.4 Software
Download --->>> https://ssurll.com/2tuXx5
How to Install and Use Pa Soft 1.4 Software for BMW Scanner
Pa Soft 1.4 Software is a powerful diagnostic tool that allows you to read and clear fault codes, reset service lights, program keys, adjust mileage, and more on your BMW vehicles. It works with a special BMW Scanner 1.4.0 device that connects to your car's OBDII port and your computer via USB cable.
In this article, we will show you how to install and use Pa Soft 1.4 Software on Windows 11 (64-bit), which is the latest operating system from Microsoft. We will also provide some tips and tricks on how to get the most out of this software.
How to Install Pa Soft 1.4 Software on Windows 11 (64-bit)
Installing Pa Soft 1.4 Software on Windows 11 (64-bit) is not very difficult, but you need to follow some steps carefully to avoid any errors or compatibility issues. Here are the steps you need to take:
Buy the BMW Scanner 1.4.0 device from a reputable seller, such as this one. Make sure it comes with a USB cable and a small disk. You will also need an adapter if your car has an old round 20-pin scanner port under the hood.
Download the Pa Soft 1.4 Software from this website. You can choose either the setup program or the portable program, depending on your preference. The setup program will install everything automatically, while the portable program will require you to extract it to a custom folder.
If you have previously installed any drivers that are not working or faulty, use the device manager to find and delete them. You can also use the CDMUninstaller.exe file inside the Scanner drivers folder to uninstall any remaining driver components.
Go to the Scanner Driver folder and right-click on the ftdibus.inf and ftdiport.inf files. Select \"install\" from the drop-down menu. These drivers are digitally signed so you don't need to disable driver signature check or test mode.
Plug in the scanner module to the car, and then the USB-end to the computer. Run the Pa Soft BMW Scanner software. It should recognize the drivers and the module and proceed to the main menu.
The software will ask you to switch on the ignition key. Turn it one click to position 01 (KL 1 or ACC). The software should recognize the car through the module.
You are good to go! You can now use Pa Soft 1.4 Software to diagnose and program your BMW.
How to Use Pa Soft 1.4 Software for BMW Scanner
Pa Soft 1.4 Software has a user-friendly interface that allows you to access various functions and features of your BMW. Here are some of the things you can do with this software:
Read and clear fault codes from various modules, such as engine, transmission, airbag, ABS, etc.
Reset service lights and intervals for oil change, brake fluid, inspection, etc.
Program keys and remotes for your car.
Adjust mileage and odometer correction.
Activate or deactivate various options and features of your car, such as daytime running lights, auto-locking doors, alarm beep, etc.
View live data and graphs from various sensors and parameters of your car.
Perform coding and adaptation of various modules and settings of your car.
To use any of these functions, you need to select your car model from the drop-down menu on the top left corner of the software. Then you need to select the module you want to access from the list on the left side of the software. You will see various tabs on the right side of the software that correspond to different functions and features of that module.
For example, if you want to read ec8f644aee